Autom at ic tr a n s mi ss io n -
------------------'
Emergency re lease of the selector lever
If the vehicle's power supply fails, the selector lever can
be released in an emergency.
Fig. 140 Removing
ashtray insert
Fig. 141 Emerge ncy
release for selector
lever
The emergency release is located under the insert for the
ashtray.
- Slide open the cover for the ashtray.
- Release the ashtray by pushing the switch © ~ fig. 140
to the right.
- Remove the ashtray insert ® ·
- Now you can see a sma ll cover in t he ashtray holder on
the front of the ashtray recess
=> fig. 141.
Cont rols and equip-
ment
- Release and remove this cover .
- You now have access to a bolt . Using a screwdriver or
similar, press the bo lt down and hold it down.
- Now press the interlock and move the selector lever to
the N position.
The select or lever can only be moved from the P position if the igni-
tion key is in the lock and the ignition is turned on. If the vehicle has
to be pushed or towed if the power supply fails (e.g. battery is
discharged), the selector lever must first be moved to the N position
using the emergency locking device . •
Vehicle care
I I
irechnical data
To Next Page
Loading...
