Audi Q5 2017 - Page 19

1 - Gear sensor - G676-
❑ Removing and installing
⇒ page 33
2 - Shaft
❑ For parking lock
3 - Bolt
❑ Renew after removing
❑ M6 × 30
❑ 3 Nm +90°
4 - Parking lock solenoid -
N486-
❑ Electrohydraulic unit
❑ Removing and installing
⇒ page 33
5 - Gasket
❑ Renew after removing
6 - Seal
❑ For parking lock shaft
❑ Renewing ⇒ page 37
7 - Pin
8 - Lever
❑ For parking lock
❑ Removing and installing
⇒ “1.10 Renewing seal
for parking lock shaft”,
page 37
9 - Cover
❑ For parking lock
❑ With electrical wiring
harness
10 - Bolt
❑ Renew after removing
❑ M6 × 14
❑ 3 Nm +45°
11 - Bolt
❑ M8 × 22
❑ Renew after removing
❑ 8 Nm +60°
12 - Dowel pin
❑ 2x
13 - Bolt
❑ Renew after removing
❑ M6 × 55
❑ 3 Nm +180°
14 - Bolt
❑ Renew after removing
❑ M6 × 35
❑ 3 Nm +90°
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
1. Selector mechanism 15