Audi Q5 2017 - Assembly Mountings; Exploded View - Assembly Mountings; Removing and Installing Tunnel Cross Member

5 Assembly mountings
⇒ “5.1 Exploded view - assembly mountings”, page 74
⇒ “5.2 Removing and installing tunnel cross member”,
page 74
5.1 Exploded view - assembly mountings
1 - Bolt
❑ 70 Nm
2 - Tunnel cross member
❑ Removing and installing
⇒ page 74
3 - Stop
❑ For gearbox mounting
4 - Gearbox mounting
❑ Removing and installing
⇒ Engine; Rep. gr. 10 ;
Assembly mountings;
Removing and installing
gearbox mounting
5 - Gearbox
6 - Nut
❑ 20 Nm
7 - Gearbox support
❑ Removing and installing
⇒ Engine; Rep. gr. 10 ;
Assembly mountings;
Removing and installing
gearbox mounting
8 - Bolt
❑ 40 Nm
9 - Bolt
❑ Renew after removing
❑ 20 Nm +90°
10 - Nut
❑ 20 Nm
5.2 Removing and installing tunnel cross
member
Special tools and workshop equipment required
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
74 Rep. gr.34 - Controls, housing