Audi Q5 2017 - Removing and Installing ATF Cooler

1 - Sealing plug
❑ For ATF inspection and
filler hole
❑ Renew after removing
❑ Tighten as far as stop
2 - Plug
❑ For MTF inspection and
filler hole
❑ Tightening torque
⇒ Item 2 (page 78)
3 - Gear oil pump (MTF pump)
❑ Must be removed to
drain gear oil (MTF)
⇒ page 78
4 - Bolt
❑ Tightening torque
⇒ Item 4 (page 78)
5 - Sealing plug
❑ For ATF
❑ Renew after removing
❑ Tighten as far as stop
7.2 Removing and installing ATF cooler
Special tools and workshop equipment required
♦ Hose clamps up to 25 mm - 3094-
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
7. ATF circuit 83