Audi Q5 2024 - Lap Timer

808012721BH
Driving information
= The traffic signs on the road always take pri-
ority over the display. The driver is always
responsible for adhering to the regulations
applicable in the country where the vehicle
is being operated.
~ Units of measurement and language set-
tings are displayed based on how they were
set in the MMI system settings > page 248.
Operation
Applies to: vehicles with traffic light information
Switching traffic light information on and
off
You can turn the traffic light information on or
off in the Driver assistance menu © page 149.
Accessing traffic light information
> Select in the instrument cluster: vehicle func-
tions
tab > Traffic signs.
If another tab or another function is selected
in the instrument cluster, the traffic light in-
formation will appear in the status bar on the
instrument cluster.
Messages
Applies to: vehicles with traffic light information,
The following messages may appear depending
on the vehicle equipment:
Malfunction! See owner's manual
The system could not be configured, for example
due to a network malfunction. Switch the igni-
tion off and shut down the vehicle to restart the
system. Wait several minutes until the vehicle
has shut down completely and then switch the
ignition back on.
Function currently unavailable. See owner's
manual
There is a temporary system malfunction. Check
if one or more of the following situations applies
and correct
the issue if necessary:
~ Traffic light information is switched off
— Data transmission is deactivated
— The vehicle is not equipped with traffic sign rec-
ognition.
— There is no valid license
— Traffic light information is not available in that
area
Lap timer
Introduction
Applies to: vehicles with lap timer
You can record and evaluate lap times with the
lap timer. You can operate the lap timer using the
multifunction steering wheel > page 16.
Opening the lap timer
» Select in the instrument cluster: Vehicle func-
tions tab > I button > Lap times.
An additional indicator will appear in the head-up
display*.
Your focus should always be on driving your
vehicle safely. As the driver, you have com-
plete responsibility for safety in traffic. To re-
duce the risk of an accident, only use the lap
timer functions in such a way that you always
maintain complete control over your vehicle in
all traffic situations.
You
can retrieve information from the trip
computer while the lap timer stopwatch is.
running.
Lap times and timing
Applies to: vehicles with lap timer
Requirement: the lap timer must be open.
Timing laps
» To start timing manually, select Start lap 1 in
the menu.
» To start timing automatically as soon as you be-
gin to drive, select Start lap 1 by driving off or
Start by driving off in the menu.
153
>
OwnersManuals2.com