Audi Q5 2024 - Page 174

Driver assistance
— Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras > page 146 to > page 149.
~The system uses corrective steering to warn
that the vehicle is leaving the lane. The driv-
er is always responsible for keeping the ve-
hicle in the driving lane.
— Corrective steering may not occur at all in
certain situations, such as during heavy
braking. Always be ready to intervene.
— Always keep your hands on the steering
wheel so you can be ready to steer at any
time. The driver is always responsible for
adhering to the regulations applicable in
the country where the vehicle is being oper-
ated.
— The system does not provide any corrective
steering or steering wheel vibrations if it de-
tects that you are passing another vehicle.
~The image in the Driver assistance display
only appears if it was opened in the trip
computer page 20.
Switching on or off
Applies to: vehicles with Audi active lane assist
ae
ict
OF
Fig. 133 Turn signal lever: button for Audi active lane as-
sist
» Press the @ button on the turn signal lever.
The respective indicator light in the instrument
cluster will turn off or on.
172
Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras © page 146 to page 149.
Adjusting Audi active lane assist
Applies to: vehicles with Audi active lane assist
You can adjust the Audi active lane assist/Lane
departure warning to your preferences in the
Driver assistance menu ® page 149. The settings
depend on the vehicle equipment.
Possible settings:
~ Steering correction - In the Late setting, the
steering correction will only occur shortly be-
fore a wheel crosses a detected lane marker
line. In the Early setting, steering correction oc-
curs continuously in order to help keep the ve-
hicle in the center of the lane. If the steering
correction cannot be set, the steering correc-
tion will function in the Late setting.
— Vibration warning - You can select if you would
also like to be warned using a vibration in the
steering wheel.
Certain settings are automatically stored and
assigned to the remote control key being
used.
Messages
Applies to: vehicles with Audi active lane assist
if I) or PMiJis displayed when there is a malfunc-
tion, the active lane assist functions may be un-
available or limited.
A message that indicates the cause and possible
solution may appear with some displays. The
weather conditions may be too poor or the cam-
era may be covered. Clean the area in front of the
camera > page 148 and try to turn on the sys-
tems again later.
If the malfunction remains, drive to an author-
ized Audi dealer or authorized Audi Service Facili-
ty immediately to have the malfunction correct-
ed.
OwnersManuals2.com