Audi Q5 2024 - Bluetooth

Additional settings
Additional settings
System settings
Introduction
General settings are described in this chapter.
You can find specific settings in the chapters
about those settings. The available settings de-
pend on the vehicle equipment.
Date and time
» Applies to: MMI: Select on the home screen:
SETTINGS > General > Date & time.
Possible settings:
— Automatically set date and time
— Date format
—Time format
— Automatic time zone
Measurement units
» Applies to: MMI: Select on the home screen:
SETTINGS > General > Measurement units.
Possible settings:
Speed
— Distance
Temperature
= Volume
— Pressure
— Consumption (engine)
— Consumption (electric motor)
Language and keyboard
» Applies to MMI: Select on the home screen:
SETTINGS > Language & Keyboard.
Language
You can change the languages for the display,
navigation announcements, and the voice recog-
nition system.
248
Keyboard
See ® page 27.
Requirement: an audio source must be active.
> Applies to MMI: Select on the home screen:
SETTINGS > Sound.
Possible settings:
~Treble
—Bass
~Balance/fader
~ Speed dependent volume control
~ Subwoofer
~ Surround level
— Focus
— 3D effect
Announcements and tones
> Applies to: MMI: Select on the home screen:
SETTINGS > Announcements & Tones.
Possible settings:
— Announcement volume
Adjust the volume of the audio system so that
signals from outside the vehicle, such as po-
lice and fire sirens, can be heard easily at all
times.
The volume is automatically adjusted to a pre-
set level when the MMI is switched on.
Bluetooth
> Applies to MMI: Select on the home screen:
SETTINGS > Connection settings > Bluetooth®
Bluetooth
You can select a setting for visibility of the MMI
to other Bluetooth devices. To connect a new
Bluetooth device, the Visible setting mustbe >
OwnersManuals2.com