Audi Q5 2024 - Replacing fuses

Emergency assistance
Rear towing loop
Fig. 198 Rear bumper: installing the towing loop (version
DY
Fig. 199 Rear bumper: installing the towing loop (version
2
The threaded opening for the towing loop is lo-
cated on the right rear of the bumper.
» Remove the towing loop from the vehicle tool
kit > page 302.
» Press the top or bottom of the cap (depending
on the model) inward with quick, strong pres-
sure © fig. 198. The cap will loosen from the
bumper. Or
> Carefully pull the cap out using the hook (from
the vehicle tool kit) > fig. 199.
» Tighten the towing eye as far as it will go into
the mount. Use a suitable object to tighten the
towing eye completely and securely in the
mount.
» After using, place the towing loop back in the
vehicle tool kit.
If the towing loop is not tightened all the way
when installing, the threads may be pulled
‘out when towing the vehicle and result in an
accident.
312
Depending on the model, the shape of the cap
can
vary.
OwnersManuals2.com