Audi Q5 2024 - Vision

Lights and vi
ion
Instrument illumination
Fig. 48 Light switch: instrument illumination
i. ~ You can adjust the background brightness of
the instruments and display illumination.
» Press the knob (@) to release it.
» Turn the knob toward "-" or "+" to reduce or in-
crease the brightness.
» Press the knob again to return it to its original
position.
Depending on vehicle equipment, the instru-
ment illumination (needles and gauges) may
turn on when the lights are off and the igni-
tion is switched on. The illumination for the
gauges reduces automatically and eventually
turns off as brightness outside increases. This
function reminds the driver to turn the low
beams on at the appropriate time.
Vision
Adjusting exterior mirrors
Fig. 49 Driver's door: knob for the exterior mirrors,
» Turn the knob in the driver's door to the desired
position:
58
0 - Deactivates all adjustment functions.
/O-Selects the left or right exterior mirror.
To adjust the mirror glass in a mirror, press the
knob in the desired direction.
@ - Heats the mirror glass depending on the
outside temperature.
=) - Folds the exterior mirrors*. To fold the mir-
rors out, turn the knob to one of the other posi-
tions. In the MMI, you can select if the mirrors
fold in automatically when you lock the vehicle
> page 37.
Front passenger's exterior mirror tilt
function*
Requirement: the knob must be in the position
for the front passenger's exterior mirror.
The mirror surfaces tilt slightly when reverse
gear is selected to provide a better view, for ex-
ample of the edge of the curb.
You can adjust the mirror surface by turning the
knob in the desired direction.
The mirror moves from the reversing position
back to the original position:
—When you switch the ignition off
~When you drive forward at speeds faster than 9
mph (15 km/h).
—When the knob is no longer in the position for
the front passenger exterior mirror
Curved mirror surfaces (for example convex)
enlarge the field of vision. However, they
make objects in the mirror appear smaller and
farther away. When using these mirrors to es-
timate your distance to vehicles behind you
when changing lanes, you could estimate in-
correctly, which increases the risk of an acci-
dent.
—Applies to: vehicles with power folding exte-
rior mirrors: If the mirror housing was
moved by outside forces (such as an impact
when maneuvering), you must use the pow-
er folding function to fold the mirror all the >
OwnersManuals2.com