– Remove adhesive spots in the luggage compartment that
are covering the mounting holes on the longitudinal member.
–
Insert bolts -A to D- on the left and right on the inside for se-
curing the towing bracket and tighten the bolts by hand.
– Align the towing bracket and tighten bolts -A to D- with the
torque specified for towing brackets with cross members.
WARNING
Securing bolts must only be used once.
7.3 Connector panel assembly
– Fit connector panel -1- for the trailer socket to the towing
bracket.
– Tighten bolts -2- to the required torque ⇒ Page 10
Installation instructions - Audi Q5 (80A) 2017 ► Fixed/mechanically removable towing
bracket with E-set (NAR),
Edition 01
16
7 Installing the towing bracket
To Next Page
Loading...
