EasyManua.ls Logo

Audi Q5 80A 2017 - Safety instructions for pyrotechnical, electrical and mechanical components of the restraint system; General safety instructions

Audi Q5 80A 2017
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Safety instructions for pyrotech-
nical, electrical and mechanical
components of the restraint
system
2.1 General safety instructions
Pyrotechnical components comprise:
Airbag units
Belt tensioners
Belt force limiters
Battery disconnecting elements
General
Testing, installation and maintenance tasks must only be
carried out by trained personnel.
There are no replacement intervals for airbag units.
Do not check using circuit tester, voltmeter, or ohmmeter un-
der any circumstances.
Pyrotechnic components must only be checked when instal-
led and using ⇒  vehicle diagnostic testers that have been
approved by the manufacturer.
When working on pyrotechnic components and the airbag
control unit -J234-, the battery earth wire must be disconnec-
ted when the IGNITION is SWITCHED ON.
The battery neg-
ative terminal must subsequently be covered.
You must wait ten seconds after the battery -A- has been
disconnected.
The battery -A- must be connected when the IGNITION is
SWITCHED ON. There must not be anybody inside the vehi-
cle during this process. Exception: vehicles with battery -A-
located inside the vehicle. Do not sit within the airbag and
seat belt deployment range.
Observe the appropriate steps after connecting the bat-
tery⇒ Page 21.
Before performing any work on pyrotechnic components in
the restraint system, e.g. before disconnecting the electrical
connector, the mechanic carrying out the task must dis-
charge any static electricity
. Electrostatic discharging can be
performed by touching earthed metal parts, e.g. by briefly
touching the door striker plate.
Wash hands after touching ignited pyrotechnical compo-
nents of the restraint system.
Pyrotechnical components must neither be opened nor re-
paired. New parts must always be used (risk of injury).
Pyrotechnic components that have fallen onto a hard surface
or that show any sign of damage must not be installed.
Installation instructions - Audi Q5 (80A) 2017 ► Fixed/mechanically removable towing
bracket with E-set (NAR),
Edition 01
2
2 Safety instructions for pyrotechnical, electrical and mechanical components of the restraint system

Related product manuals