TEXT Q5VOICE3 to 38981
Do not text and drive. Message and data rates may apply.
A name tag is required to operate the voice recognition system.
Voice Recognition:
concert radio
Name Tag Creation
1. Press the button.
2. After the beep, say “Store Name”.
To create a name tag:
13
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Voice Recognition.
4. The system will ask for the
phone number. Speak the
<numbers>, (e.g., 8-0-0,
5-5-5-, 1-2-3-4.)
5. If incorrect, say “Back” to
remove the last set of
numbers.
6. If correct, say “Store
Number”, and the system
will confirm that <name>
is saved.
3. When prompted say the
<name>. A second
prompt will ask you to
repeat the <name>,
(e.g. John Smith).
Call by name
2. Say “Select Name”. 3. When prompted,
say the <name>.
4. After name confirmation,
say “Dial”, and the number
will be dialed.
1. Press the button.
14
NOTE: To confirm or play back the saved name tags, press the button. After the beep, say “Play Phone Book”.
BLUETOOTH®
Pairing
To Next Page
Loading...
