Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 10 – Removing and installing engine
6
26
– Detach electrical wiring -1- and -2- at alternator.
– Move wiring clear.
– Remove bolts -arrows- at alternator.
♦ If alternator sticks in its bracket, screw bolt back in again
down to the last 2 turns.
♦ Tap carefully on bolt heads with flat side of hammer to re-
lease bushes of alternator mountings.
– Remove alternator.
– Unplug electrical connector -2-.
– Unscrew B+ wiring -1-.
– Remove bolt -3- for engine support.
– Remove bolts -1- and -2- and detach starter.
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ:1398556747 电话:18218750259