Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Install the front wheel measuring sensors -1- on the ACC Set‐
ting Device - VAS6190- .
– In area -A-, bring item -2- on rotary knob into alignment with
marking on mirror (number 2 on rotary knob must face toward
vehicle).
– Now align by sliding it sideways -arrows B- ACC Setting De‐
vice - VAS6190- so that the laser beam is horizontally centered
on the senor lens.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
6. Adaptive Cruise Control 261
To Next Page
Loading...
