Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Installation Position of Intake Hose and Pressure Line at Vane
Pump
– Install intake hose -arrow A- so that markings -1- and -2- align.
– Install pressure line -arrow B- so that stop bar -3- rests against
pump housing -4-.
Assembly Overview II - Power Steering Pump for Engine Gener‐
ation I with SCR and generation II
Note
♦
Always replace seals.
♦
Do not reuse fluid you have drained.
♦
Only use Hydraulic Oil .
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
328 Rep. Gr.48 - Steering
To Next Page
Loading...
