Audi Q7 2007 - Lines and Hoses Overview

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
8.2 Lines and Hoses Overview
Line and Hose Securing Elements, Assembly Overview
1 - Intake line bracket to coolant pipe, refer to
⇒ Fig. ““Suction Line Bracket To Coolant Pipe, Return Line
Bracket to Body”“ , page 366 .
2 - Location of hoses on reservoir and reservoir bracket to
body, refer to
⇒ Fig. ““Location of hoses on reservoir and reservoir bracket
to body”“ , page 367 .
3 - Return line bracket to body, refer to
⇒ Fig. ““Suction Line Bracket To Coolant Pipe, Return Line
Bracket to Body”“ , page 366 .
4 - Return line clip to refrigerant line, refer to
⇒ Fig. ““Return Line Clip to Refrigerant Line, Return Line to
Refrigerant Line Bracket”“ , page 367 .
5 - Return line to refrigerant line bracket, refer to
⇒ Fig. ““Return Line Clip to Refrigerant Line, Return Line to
Refrigerant Line Bracket”“ , page 367 .
6 - Return line clip to coolant line, refer to
⇒ Fig. ““Return Line Clip to Refrigerant Line, Return Line to
Refrigerant Line Bracket”“ , page 367 .
7 - Hoses to hydraulic oil cooler, refer to
⇒ Fig. ““Hoses to Hydraulic Oil Cooler”“ , page 367 .
8 - Return line bracket to subframe, refer to
⇒ Fig. ““Return Line Bracket to Subframe, Return Line to
Coolant Hoses”“ , page 368 .
9 - Return line to coolant hoses, refer to
⇒ Fig. ““Return Line Bracket to Subframe, Return Line to
Coolant Hoses”“ , page 368 .
Suction Line Bracket To Coolant Pipe, Return Line Bracket to
Body
– Secure suction line -1- on coolant pipe -3-. Tighten nut -2- to
9 Nm.
– Secure return line -5- with line brackets -4- to body.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
366 Rep. Gr.48 - Steering