Audi Q7 e-tron quattro 4M - Combinations of Drive Select and e-tron Modes

63
Combinations of selector positions and e-tron modes within the Audi drive select modes
e-tron modes EV Hybrid
2)
Battery Hold
Audi drive select Modi
Selec-
tor
posi-
tion
e-tron mode Selec-
tor
posi-
tion
e-tron mode Selec-
tor
posi-
tion
e-tron mode
oroad
1)
(with steel spring suspen-
sion)
lift / oroad
1)
(with air suspension)
D
1)
EV D CAN D Battery Hold
allroad D EV D CAN D Battery Hold
S S CAN S
3)
BatteryHold
4)
eciency E EV E CAN E Battery Hold
S S CAN S
3)
BatteryHold
4)
comfort D EV D CAN D Battery Hold
S S CAN S
3)
BatteryHold
4)
auto
5)
D
5)
EV
5)
D CAN D Battery Hold
S S CAN S
3)
BatteryHold
4)
dynamic D EV D CAN D Battery Hold
S CAN S
3)
BatteryHold
4), 6)
The possible combinations of Audidriveselect, the e-tronmodes
and the gears are defined. These combinations are key factors
determining the drive characteristics of the AudiQ7e-tronquattro.
In the individual mode of Audidriveselect, one of the listed
Audidriveselect modes can be selected for the engine/gearbox
regardless of the other vehicle systems.
Since Audidriveselect aects other systems in addition to the
hybrid drive, its combination options rank ahead of the selectable
e-tronmodes.
1)
In the oroad or lift/oroad mode of Audidriveselect, selector position S is not available.
If the lift/oroad of Audidriveselect is activated in models with air suspension, the internal combustion engine is started. In models with air suspension,
therefore, electric drive is unavailable in this mode. When a speed of 30kph is exceeded, the vehicle exits this mode and switches to allroad mode.
Electric drive is possible in models with steel spring suspension. A maximum speed of 30 kph does not apply here.
2)
If Predictive Eciency Assist (PEA) is activated via the MMI and if route guidance is started, the e-tron mode Hybrid is set automatically and once only during
the driving cycle. The condition for this is a distance which exceeds the maximum electrical range.
3)
If selector position S is selected, the resultant combination is S-BatteryHold. If the combination S-BatteryHold is engaged from selector position D, the last
combination of selector position and e-tron mode is restored, provided that the e-tron mode has not been changed in the interim.
4)
Starting from the S-Battery Hold combination, S-Hybrid can be accessed via D-EV by pushing the electric drive button E656 in quick succession. D-EV can be
set by pushing the electric drive button E656 in slow succession. The e-tron modes can be freely selected using the rotary pushbutton.
5)
After a change of terminal status, a combination of Audidriveselect mode auto, e-tron mode EV and selector positionD is always used for restarting the
vehicle. The combinations D-Hybrid, D-BatteryHold and D-EV can be selected in sequence using the electric drive button E656. The e-tron modes can be
freely selected using the rotary pushbutton on the MMI.
6)
If the dynamic mode of Audidriveselect is selected, the resultant combination is S-BatteryHold. If a new Audidriveselect mode is selected from the
dynamic mode of Audidriveselect, the last combination of selector position and e-tron mode is restored, provided that the e-tron mode has not been
changed in the interim.
Moving the selector from D to M or from S to M and back does not change the modes of AudiDriveselect or the e-tron drive.
Change e-tron modes
Shift from D/S
Key:
ProCarManuals.com
< Back
Forward >
Ξ Contents