50
Electrical
Wiper System
The wiper system consists of two wiper motors with
integrated electronics.
Onboard supply control module J519 is part of the
Comfort CAN within the vehicle network. It takes over
the function of the LIN master for the control module
of wiper motor J400. This control module regulates the
wiper processes and controls front passenger side wiper
motor control module J584.
The wiper control modules are integrated into the wiper
motors.
The wipers can be put into the service position using the
“Set” menu item in the extended comfort menu. This
position can also be used in winter when covering the
front window to protect it from icing up.
Vehicle Electrical System
Control Module J519
Passenger’s Windshield
Wiper Motor Control
Module J584
Wiper Motor
Control Module
J400
Rain/Light
Recognition Sensor
G397
LIN
Data Line
To Next Page
Loading...
