lffll.,___ W __ h_a_t_ d_o_ I_ d_o_ n_ o_w_ ? _____________________________________________ _
- Remove the towing loop from the vehicle tool kit
=>
page 224.
- Pull the lower part of the grill forward and out .
- Screw the towing loop tightly into the threaded hole as far
as it will go => fig . 136 .
When it is no longer needed, unscrew the towing loop and put it back
into the on-board toolkit . Make sure to have the towing loop stored
in the vehicle at all times .
When installing the grill for the air duct, be sure that the tabs on the
gr ill are first inserted into their guides on the vehicle. Then push the
grill into position.
& WARNING
If the towing loop is not screwed in as far as it will go, the thread
can pull out when the vehicle is towed - potential risk of an acci-
dent.
[I] Tips
Check carefully to make sure the hook-up is secure •
To Next Page
Loading...
