901- Engine Warm-Up Procedure / Engine Start
Version 1 2016-01-01 100 / 113
901 - 1.2 Checking Engine Oil Level
See chapter 100 – 1.2 Engine Lubrication for information about engine oil
quality and fill level.
Checking engine oil level
1. Position the car on a level, flat surface
2. Run the engine until the engine oil temperature reaches 100 °C –
110 °C (see chapter 901- Engine Warm-Up Procedure / Engine Start
3. Run the engine at idle speed for approx. 2 minutes
4. Switch off the engine and after approx. 2 minutes check the oil level
5. Oil level in ‘Fill’ range: add 1 litre oil until oil level reaches ‘Don not
fill’ range
6. The oil level should be in the upper third of the ‘Do not fill’ range
To Next Page
Loading...
