901- Engine Warm-Up Procedure / Engine Start
Version 1 2016-01-01 103 / 113
e) Checking steering oil level
1. Unscrew filler cap
2. Clean the oil dipstick with a dry cloth
3. Screw in the filler cap hand and then remove again
4. Check oil level
5. Oil level at room temperature between ‘MAX 20° and MAX 20° -
3mm’. Oil level immediately after turning off engine at operating
temperature between ‘MAX 80° - 3 mm and MIN 80°’.
f) Brake fluid
See chapter 600- Brake Pipes, Brake Cooling Ducts, Wheels and Tyres for
information about brake fluid quality and fill levels.
To Next Page
Loading...
