000 – Air Jack and Fire Extinguisher
Version 1 2016-01-01 16 / 113
Activating Extinguishing System
- When the toggle switch on the control unit is set to ‘ON’, the
extinguishing system is operational. Only the system active LED glows.
The fire extinguisher is activated and extinguishant is discharged from the
nozzles by pressing the ‘FIRE’ button on the dashboard or by pulling out
the pip pin emergency fire extinguisher switch located in the front
cover cowling.
- When the racecar is no longer in operation, the fire extinguisher system
should be deactivated. Set the toggle switch to the ‘OFF’ position.
Changing the Control Unit Battery
- Attention: The toggle switch mounted on the control unit must be set in
the ‘OFF’ position.
- Remove the control unit cover and replace the battery. Ensure that the
battery polarity is correct.
- Use only original batteries of specification DURACELL PLUS Alkaline MN
1604 6LR61 9 V or Philipps Alkaline 6LR61 9 V.
To Next Page
Loading...
