100 – Engine Ancillaries, Oil Tank and Water Cooler
Version 1 2016-01-01 26 / 113
Special Tools Required
Cooling system filling device - VAS 6096
Adapter for cooling system tester - V.A.G 1274/8
- Fill the VAS 6096 coolant reservoir with approx. 20 litres of premixed
coolant in the desired ratio.
- Screw the adapter for the V.A.G 1274/8 cooling system tester onto the
coolant reservoir.
- Fit the cooling system filling device VAS 6096 to the adapter V.A.G
1274/8.
- Place the bleed hose (1) into a small container (2).
- The air extracted contains a small amount of coolant, which should be
collected.
To Next Page
Loading...
