200 – Fuel Cell and Exhaust System
Version 1 2016-01-01 33 / 113
200 – 1-2 Service Instructions Refuelling Coupling
RFC-88-TN and RFC-88-N
We recommend that the coupling O-rings are coated with “Molykote 1292”
grease after every event. Use the RFC-88-TN service tool to depress the inner
piston down until the 2 O-rings in the housing are visible. Afterwards the O-rings
can be lubricated and / or changed as required. The seals and lubricant are
available as kit (part number RFC-88-TN service kit) from Krontec. In addition,
we recommend that the coupling should be completely rebuilt after a complete
season or 10,000 km by Krontec (replace all seals, etc.).
Image 7: Refuelling Coupling and Molykote 1292 Grease
To Next Page
Loading...
