Audi R8 LMS 2018 - Page 43

400 – Front Axle, Anti-Roll Bar, Dampers and Steering
Version 1 2016-01-01 43 / 113
Anti-dive angle
11.8 °
10.2°
For 390 mm centre
of gravity height
and 60 % front
brake balance
Anti-dive percentage
87 %
50%
Anti-squat angle
-
0.5 °
Anti-squat percentage
-
6%
Steering rack ratio
6.747 °/ mm
-
Steering wheel
angle / rack bar
displacement
Overall steering ratio
17
-
Steering wheel
angle / wheel
angle
Max. rack bar travel
± 41.5 mm
-
Limited by
mechanical stop
Max. steering angle at
wheel, turning out
18.4 °
-
Left wheel to left
Max. steering angle at
wheel, turning in
17.7 °
-
Right wheel to
right
1)
…The front or rear standard height or ride height is the distance between the road surface and
the under floor and is given at the front and rear axle centre lines (longitudinal position).
The standard FIA heights or FIA ride heights are the distances between the road surface and the
chassis to the FIA measurement points defined in the FIA homologation.
Design level (abbreviation: KL) is the position or the set-up of the car as shown in CAD. It is only
a reference.