700- Pneumatic Gearshift and Pedals
Version 1 2016-01-01 67 / 113
Attention
Only push the pedal unit forward using the area marked in the image below.
Pushing in other positions (e.g. on the left footrest or the brake pedal) increase
the force required and can cause the unit to jam!
Image 22: Push Surface on the Pedal Unit Cover
When the button is released, two independent springs push the lock into the
detents. If the lock is between two detents, the next closest position can be
selected by releasing or pushing with the right heel. The lock then clicks audibly
into position and the pedal unit is locked in position. Pressing with heel again
checks whether the unit is locked safely and thus ready for use.
To Next Page
Loading...
