700- Pneumatic Gearshift and Pedals
Version 1 2016-01-01 69 / 113
700 - 1.2 Throttle Pedal
The following adjustments can be made to the throttle pedal:
- Lateral position of the pedal plate
- Spring preload
- Damping
a) Lateral Position of Pedal Plate
There are two positions. The pedal in the left hand image shows the standard
position. The plate can be moved 10 mm to the right to create more space
between the throttle and brake pedal.
Image 23: The Two Possible Throttle Pedal Plate Positions
b) Spring Preload
A long compression spring is installed in the throttle pedal. At one end, a
plunger pushes the pedal against the foot, at the other end there is a threaded
stud with a nut.
To Next Page
Loading...
