700- Pneumatic Gearshift and Pedals
Version 1 2016-01-01 71 / 113
c) Damping
The damper of the throttle pedal is located below the cover on the left of the
gas spring used for moving the sledge.
Image 26: Pedal Assembly – Throttle Pedal Damper
The damping is adjustable. The standard setting is completely soft. Changing
the damping is made by rotating the cylinder relative to the piston rod. When
fitted, the damping is adjusted as follows:
- Remove the pedal unit cover (4 bolts)
- Disconnect the spherical bearing of the gas spring used to adjust the
sledge
- Remove the rear mounting bolt of the damper
To Next Page
Loading...
