700- Pneumatic Gearshift and Pedals
Version 1 2016-01-01 74 / 113
700 - 1.3 Brake Pedal
The following adjustments can be made to the brake pedal:
- X Position (longitudinal offset between brake and throttle pedals)
- Y Position (distance to throttle pedal and to left foot rest)
- Z Position and angle (height and angle of pedal plate)
a) X Position
In the standard position, the brake pedal plate is on the same plane as the left
footrest and compared to the throttle pedal plate 10 mm closer to the driver. If
required, the brake pedal can be moved another 10 mm closer to the driver. A
second row of holes is provided in the brake pedal plate for this purpose.
Image 28: Basic Setting: Brake Pedal Plate
10 mm in Font of Throttle Pedal Plate
Image 29: Setting Brake Pedal Plate 20
mm in Front of Throttle Pedal Plate
To Next Page
Loading...
