700- Pneumatic Gearshift and Pedals
Version 1 2016-01-01 75 / 113
Attention
The distance between the pedal plate and the driver should not be adjusted on
the brake master cylinder, otherwise the bell crank geometry changes and the
system can stick in the depressed position!
b) Y Position
To increase the distance to the left footrest or the throttle pedal plate to the
right, the brake pedal plate can be turned through 180°.
Image 30: Brake Pedal Plate Long Side Left
Image 31: Brake Pedal Plate Long Side Right
c) Z Position and Angle
The brake pedal plate can be adjusted in both height and angle for drivers with
particularly large or small feet.
To Next Page
Loading...
