900- Electric and Data Acquisition
Version 1 2016-01-01 88 / 113
The following changes can only be made online:
- Every calibration or adjustment
- Adapting the pit speed (after changing the value always copy the WP,
work page, to the RP, reference page)
After connecting to the car, a status LED (green, yellow or red) is displayed for
every component listed in the system tree.
Three green status LEDs indicate that the computer configuration matches the
car.
Changes made offline, for example a modified display view, are highlighted with
the yellow status LED. A message window appears automatically and prompts
whether the values should be adjusted (DOWNLOAD) – DOWNLOAD means that
something is written from the computer to the car.
Example
- Offline display changed -> Status yellow
DOWNLOAD CONFIGURATION
- Offline lap trigger changed -> Status yellow
DOWNLOAD CONFIGURATION
- Offline logger changed -> Status yellow
DOWNLOAD CONFIGURATION
To Next Page
Loading...
