Average fuel mileage
The average fuel economy in MPG (l/ 100 km)
since you last clea red the memory appears in
this display .
Current fuel mileage
The instantaneous fue l consumption in miles
per gallo n (l/100 km) is shown in this disp lay.
When the ve hicle is stationary, t he most re-
cent fuel consumption is displayed.
Average speed
The average speed in mph (km/h) since the
last time the disp lay was reset appears in t he
disp lay.
Elapsed t ime
The length of time that you have been driving
since you last reset the memory appears in
this display . The maximum time period that
can be recorded is 999 hours and 59 minutes .
Distance
The elapsed dist ance since the last time the
memory was clea red appears in the display .
The max imum distance that can be recorded
is 9,999 .9 m iles (9,999 .9 kilometers) .
(D Tips
All stored values will be lost if the vehicle
battery is disconnected .
Operation
The trip computer is controlled by two
switches on the windshield wiper lever .
~---1 @
Fig. 12 Wiper arm/ wiper lever: controls fo r t he t rip
comput er
Dr iv er in f ormation system 23
Selecting the trip computer
.,. Tap the ! RESE T I but ton @ unt il the t rip
computer (memory level 1 or 2) ap pears in
the display ~ poge22 ,
fig . 11.
Selecting the functions
.,. Push in the upper (lower) protrus io n on t he
function selector sw itch
@ ~ fig. 12. The
functions for t he tr ip comp ute r are dis-
played in succession on the respective mem-
ory leve ls.
Resetting the funct ion to zero
.,. Push the I RESE T ! button @ fo r at leas t two
seconds.
You can reset the following values to zero:
- driving t ime
- distance
- average fue l mileage
- average speed
The trip computer only operates when the ig-
nit ion is on . When you tu rn on the ignition,
the f unction t ha t was in use when you last
tu rned t he ignition off will be displayed .
@ Tips
- You can also set the va lues for the func-
ti ons t o zero in t he me nu d is play
(Reset)
~page 24 .
- All sto red values will be lost if the vehi-
cle battery is disconnected.