SE (Southeast), S (South), SW (Southwest),
W (West), NW (Northwest).
@ Tips
To avo id inaccurate directions, do not al-
low any remote controls, electrical sys-
tems, or metal parts close to the mirror .
Setting the magnetic deflection zone
The correct magnetic deflection zone must be
set in order to display the directions correctly.
®
Fig. 75 Magnet ic defl ection zone boundar ies
.. Hold the @ button
~
page 64, fig. 7 4 down
unt il the number of the set magnetic deflec -
t ion zone appears on the inter ior rear view
mirror .
.. Adjust the magnetic deflection zone by re-
peatedly pressing on the @ button . The set
mode automatically deactivates after a few
seco nds .
Calibrating the compass
The compass has to be recalibrated if the dis-
play is wrong or inaccurate .
.. Hold the @ button down until the letter C is
displayed on the inter ior rearview m irror .
Clear vi sion 65
.. Drive in a circle at a speed of abo ut 5 mph
(10 km/h) until a direction is shown on the
interior rearview mirror .
A WARNING
The digital compass is to be used as a di-
rectional aid only. Even though you may
want to look at it while you are driving, you
must still pay attent ion to traffic, road and
weather conditions as well as othe r possi-
ble ha za rds.
To Next Page
Loading...
