82 On the road
You can a lso increase your speed by pressing
the accelerator pedal. After you release the
accelerator pedal, the system automat ically
adjusts back down to the speed you previously
set .
However, if you exceed this speed by 5 mph
(10 km/h) for longer than 5 m inutes, the stor -
ed speed will be deleted. You will have to re-
save it.
Briefly pressing lever
The desired speed is increased by about 2 mph
(2 km/h) by briefly pressing the lever upwards
towards
c:> page 81, fig . 87 0 -
The desired speed is decreased by about 2
mph (2 km/h) by briefly pressing the lever
downwards towards
c:>poge 81, fig. 87 G) .
Switching control mode off temporarily
.. Step on the brake pedal, or
.. Depress the clutch pedal all the way, or
.. Press the lever towards @ (not latched)
c> page 81, fig . 87 .
When the system is turned off temporarily,
the speed stored at the time is retained.
To resume the stored speed, release the brake
or clutch pedal and pull the lever to position
(D.
If no desired speed was stored when the sys-
tem was temporarily switched
off, you can
store a new desired speed as follows: Drive at
the desired speed and briefly press button
c> page 81, fig. 87 @ (SET).
A WARNING
You should only return to the saved speed
if it is not too fast for the current traffic
conditions - risk of an accident!
Deactivating
.. Press leve r into position @ (latc hed)
¢ page 81, fig. 87 .
The saved speed value is deleted when the ig-
nition is switched
off.
(D Tips
Switch t he cruise control system off com-
pletely at the end of each trip. When you
start the next trip, the desired speed can
be set simp ly from the basic setting
c>poge 81.
Audi magnetic ride
Damping con be adjusted to the driver's pref-
erence and it adapts automatically to the cur-
rent driving situation .
Fig. 88 Center console: Switch for Audi magnet ic ride
.. Press the switch c:> fig. 88 to turn sport set-
ting on or
off.
Audi magnet ic ride is an elec tronic a lly con-
trolled damping system . This chas sis system
assists the driver by adapting to the particular
situation through imperceptible control proc-
esses. The
damping provides individual modu-
lation of damp ing forces. For examp le, with
damp ing characteristics set to provide greater
comfort, damping is set somewhat harder for
a brief period only as required, when rounding
a curve and when braking .
Standard setting
Se lect the standard setting if you prefer a sus-
pension setting emphasiz ing comfort.
Sport setting
Select the sport sett ing if you prefer a spo rty
suspension setting . The LED in the switch
g
comes on to indicate sport setting .
To Next Page
Loading...
