Setting up:
p Take the windbreak out of the storage
bag (luggage compartment).
p F
old the two side sections outwards.
p Pull out the retainer pegs (left/right)
and hold the windbreak in a horizontal
position against the backr
est upholstery.
p Slide the retainer pegs (left/right) all
the way into the mountings.
p P
ress the release catches (left/right)
and slide the locking pins into the
mounting holes
at the sides.
p Fold the vertical section of the wind-
break into the fully
upright position.
Removing:
Follow the instructions in reverse order.
C
B
A
A
Windbreak
Cruise control
system
When the system is switched on, the
indicator lamp appears in the
instrument cluster.
To switch on/off: Pull/press lever .
To set speed: Press button .
To adjust stored speed: Press lever up
(faster) or down (slower).
1
2
To Next Page
Loading...
