Audi TT 2007 - Assembly Mountings - Exploded View

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
8 Assembly mountings - exploded view
1 - Bolt
❑ 40 Nm + 90°
❑ Gearbox support to
gearbox
❑ Renew
2 - Bolts
❑ 40 Nm + 90°
❑ Pendulum support to
gearbox
❑ Renew
3 - Engine support
4 - Bolt
❑ Engine support to en‐
gine
❑ Tightening torque ⇒
Rep. Gr. 10
5 - Engine mounting
6 - Bolt
❑ Engine mounting to
body
❑ Tightening torque ⇒
Rep. Gr. 10
7 - Connecting bracket
8 - Bolt
❑ Connecting bracket to
engine mounting
❑ Tightening torque ⇒
Rep. Gr. 10
9 - Bolt
❑ Connecting bracket to
body
❑ Tightening torque ⇒ Rep. Gr. 10
10 - Bolt
❑ Engine mounting to body
❑ Tightening torque ⇒ Rep. Gr. 10
11 - Bolts
❑ Engine mounting to engine support
❑ Tightening torque ⇒ Rep. Gr. 10
12 - Pendulum support
❑ Removing and installing
⇒ page 64
13 - Bolt
❑ 100 Nm + 90°
❑ Pendulum support to subframe
❑ Renew
14 - Bolt
❑ 60 Nm + 90°
Audi TT 2007 ➤
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
8. Assembly mountings - exploded view 59