Audi TT 2016 - Axles and Wheel Alignment

29
630_083
Front axle
The front axle is based on the Modular Transverse Platform
(MQB). The MacPherson concept used in the predecessor
model has been adopted for the 2016 TT.
To achieve a high level of driving dynamics, the Audi TT has
special suspension setups.
Spring
• Steel spring with linear characteristic
• TT-specic setup
Sway bar link
• Steel construction with
plastic ball joints
Pivot bearing
• Aluminum construction
Track control arm
• Aluminum construction
Engine/transmission mount
• Aluminum construction
Anti-roll bar
• Tubular anti-roll bars
Joint
• Ball joint as link between track
control arm and pivot bearing
Wheel bearing/wheel hub
• 3rd generation wheel bearing
with integrated wheel hub
Damper
• 2-tube damper with polyurethane auxiliary spring
• TT-specic setup
• Low-friction axial bearing
Axles and wheel alignment