Audi TT 207 - Rear Bumper - Audi TT

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.3 Rear Bumper - Audi TT
⇒ “1.3.1 Rear Bumper Assembly Overview“, page 159
1.3.1 Rear Bumper Assembly Overview
1 - Bumper
❑ Removing, refer to
⇒ “2.3.1 Rear Bumper“,
page 174
2 - Left inner guide piece
3 - Bolt
❑ 2.5 Nm
4 - Left outer guide piece
5 - Clip
❑ Slid into side panel.
6 - Bolt
❑ 2.5 Nm
7 - Clip
❑ Slid into side panel.
8 - Bracket
9 - Right inner guide piece
10 - Right outer guide piece
11 - Bolt
2.5 Nm
12 - Nut
❑ 4 Nm
13 - Side impact bar
14 - Bolt
❑ 23 Nm
15 - Impact absorber
❑ Slid onto impact mem‐
ber.
16 - Bolt
❑ 2.5 Nm
17 - Left cover strip
❑ Removing ⇒ page 178
18 - Right cover strip
19 - Bolt
❑ 2.5 Nm
20 - Towing hook cover
21 - Lower cover
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Description and Operation 159