Audi TT 207 - Rear Lid Seal

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.3.7 Rear Lid Seal
1 - Lid seal
❑ To remove, remove seal
from body flange.
❑ When assembling, align
seal with butt joint
-arrow- on left ball stud
and press on all around
body flange.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
58 Rep. Gr.55 - Hood, Lids