Cl e ar vision
& WARNING (con tinued )
water ; medical attent ion is recommended . Thoroughly wash
affected clothing and shoes before reuse.
• If swallowed and person is conscious, rinse mout h with w ater
for at least 15 minutes. Do not induce vomiting unless instructed
to do so by medical professional . Get medical attenti on immedi -
ately.
0 Note
Liquid electro lyte leaked fro m a broken mirror glass will damage any
plastic surfaces it comes in contact with. Clean up spilled electrolyte
immedia tely with clear water and a sponge.
[ i ] Tips
• If you switch off the automatic dimming function on th e inside
mirror, automati c dimming of th e outside mirrors will likewi se be
disabled.
• Check to make sure there are no objects preventing light from
reaching the inside mirror.
• Do not attach any stickers to the windshield in front of the two
light sensors, as this would interfere wi th both the automatic oper-
ation of the headlights and the automatic dimming of the inside
mirror(sl. •
Outside mirrors
The outside mirro rs are electrically adjusted.
Adjusting th e outside mirrors
Fig. 57 Forward
secti on of driver's
armrest : power mirror
cont rols
Turn the adjusting knob to position (D ~ fig . 57 to adjust
the outside mirror on t he driver's side.
Turn the adjusting knob to position @ to adjust the
outside mirro r on the passenger side .
Press the kno b in the appropr iate direct ion to move the
mirror surface so that you have a good view to the rear.
Heated mirrors
- Tur n the knob to posi t ion
@.
Depending on the outside tempera ture, the mirror surfaces are
heated unti l the ignition is switched off - even
if the knob is no
longer in position @ .
0 Note
• Curved (i.e. convex) mirror surfaces increase your fie ld of view.
Remember that vehic les or other objects will appear smaller and
farther away than when seen in a flat mirror. If you use this mirror to .,
To Next Page
Loading...
