Audi TT Coupe 2016 - Configuration through Myaudi; Activating;Configuring Specific Audi Connect Services; Logging into Myaudi in the Vehicle

Audi connect
After connecting successfully
After connecting successfully, the signal strength
is indicated in the Infotainment system display
status line with one or two symbols, depending
on the connection type @ I@ Q page 101,
fig. 101.
You can now use Audi connect.
... Select: the I MENU l button> Audi c onnect .
... Confirm the system prompt asking to connect
to the Internet with Yes, alway s if required .
Removing the SIM card
... Press on the SIM card briefly. The card is re-
l eased from the slot. Remove t he SIM card.
CD Note
Aud i connec t is designed for use only with the
provided SIM card. Audi AG is not liable for
the consequences of using other SIM cards.
Tips
- You can connect a cell phone with Bluetooth
(handsfree) to make phone calls
Qpage 110.
- Audi does not provide support for other SIM
cards. Audi
recommends using only the pro-
vided SIM card.
- You can spec ify when the MMI establishes
an I nternet connection. The Internet con-
nection disconnects automatically once the
r equested Audi connect serv ice no longer re-
qui res any data packets.
- T he data connection for Aud i con nect ser v-
i ces is preconfigured at the factory. Howev-
er, if you need to adjust the configura tio n,
you can
change the data connection at any
time.
122
Configuration through
my Audi
Activating/configuring specific Audi
connect services
Applies to vehicles with Audi connect
Some Audi connect services must be activated/
configured through your personal myAudi ac-
count before using them for the first time .
-
If you do not have a personal myAudi account
yet, you can register online at my.audiusa.com.
-Add your vehicle to your myAudi account .
-Activate/configure the Aud i connect se rvices
you wou
ld like for your vehicle in your myAudi
account.
- For some Audi connect services, you may also
have
to enter your myAudi user data or your
myAudi
PIN when accessing servi ces in the M MI
to connect your vehicle to myAudi.
For
detailed configuration information, see
my.audiusa.com.
Logging into myAudi in the vehicle
Applies to vehicles with Audi connect
To use some Audi connect services (such as Face-
book*), you must first connect your vehicle with
myAudi to transfer
your personal settings from
your myAudi account.
... Select: l MENUI button> Audi c onnect > ri ght
control button > Log in .
... Enter your myAudi user data. Or: enter your 8-
digit myAudi PI N.
... Confirm your entry wit h OK .
Then you can
open your personal settings from
your myAudi account in your vehicle.
Tips
You can receive your myAudi PIN if you have
set up a myAudi account. For addit i onal infor-
mation, see my.audiusa.com.