Audi TT Coupe 2016 - System Settings; Setting the Date and Time; MMI Settings; Units of Measurement

System settings
System settings
Setting the date and
time
You can set the clock time manually or using the
CPS.
.,. Select: I MENU I button> Settings > left control
button > MMI settings > Date & time.
Automatic setting
When this function is switched on~, the time
and date are automatically adjusted .
Time
Th e Time can be set manually. The Automatic
setting
must be swi tched off to do this.
Date
The Date can be set manually. The Automatic
setting
must be switched off to do this.
Time zone
When selecting the appropriate time zone, a
sampling of countries in this zone will be listed.
Automatic time zone*
When the automatic time zone function is
swit
ched on, the time will automatically adjust to
the corresponding time zone .
Time format
If you select 24h , th e clock will display, for ex-
ample , 13:00 . If you se l ect AM/PM , the clock
will display, for
examp le, 1:00 PM .
Date format
If you select 00 .MM. YYYY , the date will display,
for example, 31 . 12 . 2015 . If you se l ect MM/DD/
YYYY, th e da t e will display, for examp le,
12 / 31 / 2015 . If you select YYYY·MM·DD, the
date display will display, for example,
2015-12-31 .
MMI settings
.,. Select : I MENU I button> Settings > left control
button > MMI settings.
166
Language
The display language as well as the language for
Voice guidance* and the voice recognition sys-
tem * can be changed.
The number of languages available depends on
the market .
Units of measurement
The following uni ts can be selected :
- Speed (mph or km/h)
- Distance (miles or kil ometers)
- Temperature (°F or
0
()
- Fuel consumption (l/lOOkm, mpg (US), mpg
(UK) or km/l)
- Volume ( li ters, ga llons)
Operating tips
When the function is switched on~. your MM!
shows you operating tips for input . The frequency
of how often it displays decreases with time. You
can switch off the operating tips at any time.
Voice recognition*
Command display: the display of possible com-
mands during voice input can be switched on or
off .
Short dialog: prompts in a shorter format can be
switched on
or off.
Speech dialog system volume: you can adjust
the volume of the announcements by turning the
contro l knob.
Individual speech training (only when the vehi-
cle is
stationary): you can adapt the voice recog-
nition
system to your voice or pronunciation in
order to improve the system's ability to recognize
your speech. Ind ividual tra in ing is comprised of
20 speech entries that consist of commands and
sequences of numbers. You can delete the pro-
grammed voice training with the Reset individu-
al speech training function.
Factory default settings
The following functions can be reset to the facto-
ry default settings:
- Sound settings ~