EasyManua.ls Logo

Audi TT Coupe 2016 - Tether Anchors and Tether Straps

Audi TT Coupe 2016
322 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Child
safety
• Attach
both
hook-on
connectors
with
the
spring
catch
release
on
the
child
safety
seat
onto
the
L
ATCH
lower
anchorage
so
that
the
connectors
lock
into
place Q
fig.
173.
• Pull
on
the
connector
attachments
to
make
sure
they
are
properly
attached
to
the
LATCH
lower
anchorage
.
• Pull
straps
tight
following
the
child
restraint
manufacturer's
instructions.
Releasing
• Loosen
the
tension on
the
straps
following
the
child
restraint
manufacturer's
instructions.
• Depress
the
spring
catches
to
release
the
an-
chorage
hooks
from
the
l
ower
anchorages.
Remember: Use
tether
straps
to
help keep
the
child
restra
i
nt
firmly
in
place.
A
WARNING
Improper
use
of
the
LATCH
system
can
in-
crease
the
risk
of
serious
personal
injury
and
dea
t h
in
an
accident.
- These
anchors
were
developed only
for
child
safety
seats
using
the
"LATCH"
system.
- Never
attach
other
child
safety
seats,
belts
or
other
objects
to
these
anchors.
- Always
make
sure
that
you
hear
a click when
latching
the
seat
in
place.
If
you
do
not
hear
a click
the
seat
is
not
secure
and could fly
forward
and
hit
the
interior
of
the
vehicle,
or
be
ejected
from
the
vehicle.
A
WARNING
Improp
er
installation
of
child
restraints
will
increase
the
risk
of
injury
in
an acc
id
ent.
- Always follow
the
child
restraint
system
manufacturer's
in
structions
for
proper
in-
stallation
of
the
child
restraint
system
and
proper
use
of
tether
straps
as
well
as
the
lower
anchorages
or
safety
belts
in
your
ve-
hicle.
- Always read and
heed
the
important
infor-
mation
and
WARNINGS
about
child
safety
and
the
installation
of
child
restraint
sys-
tems
Q page
212
, Child safety.
228
Tether anchors and
tether
straps
Fig.
174
Tether anchors:
attachment
hook locations be·
hind the rear seatbacks
The
tether
anchors
for
the
rear
seating
positions
are
located on
the
backside
of
the
rear
seat·
backs .
A
tether
is
a
straight
or
V-shaped
strap
that
at-
taches
the
top
part
of
a child
restraint
to
spec
i
al
anchorage
points
in
the
vehicle.
The
purpose
of
the
tether
is
to
reduce
the
for-
ward
movement
of
the
child
restraint
in
a
crash,
in
order
to
help
reduce
the
risk
of
head
injury
that
could
be
caused
by striking
the
vehicle inte-
rior.
Forward facing child
restraints
manufactured
af-
ter
September
1,
1999
,
are
required by U.S.
fed-
eral
regulations
to
comply with
new
child
head
movement
performance
requirements.
These
new
performance
requirements
make a
tether
necessary on
most
new
child
safety
seats
.
A
WARNING
Improper
installation
of
child
restraints
will
increase
the
risk
of
injury
and
death
in
a
crash.
-Always
follow
the
instructions
provided by
the
manufacturer
of
the
child
restraint
you
intend
to
install
in
your
Audi.
-
Improper
use
of
child
restraint
anchors
(in-
cluding
tether
anchors)
can
lead
to
injury
in
a collision. The
anchors
are
designed
to
withstand
only
those
loads
imposed
by cor-
rectly
fitted
child
restraints.
- Never
mount
two
child
restraint
systems
on
-
one
LATCH
lower
anchor
point.
..,.

Table of Contents

Related product manuals