Audien Atom Pro 2 - Page 9

Volume &
Mode Switch
Pull
wire
6
5
SETTING UP YOUR DEVICE
The Audien Atom Pro 2 can be worn dierently depending on
the user’s ear canal shape. Neither device is LEFT or RIGHT ear
specic, ensuring a universal t.
Try inserng it into your ear: curving both
forwards and backwards to determine
which is most comfortable for you.
Inserng Into Ear
Powering ON/OFF
The Atom Pro 2 does not have an ON/OFF switch. The device will
automacally power o and begin charging when placed into the
Charging Case.
The Audien Atom Pro 2 must always be returned to the Charging Case when not in
use. Otherwise the devices will remain on and drain the baery.
Charging The Charging Case
The center light of the case glows red once it is plugged into power. The le and
right lights glow red when charging then glow green when fully charged. Aer
charging the case, press the buon on the back to acvate the charging light indica-
tors. This acon lets you monitor the baery level of both the charging case and the
devices. The Atom Pro 2 will support up to three addional wireless charging cycles.