3
SETTING UP YOUR DEVICE
Adjusting The Volume
To adjust the volume on your Audien Atom Pro you will need the
Volume Adjusting Tool/Cleaning Brush. Insert the Volume Adjusting
Tool end (the non-brush side) into the small slit on the volume dial.
Turn the volume dial COUNTERCLOCKWISE to decrease the
volume, and CLOCKWISE to increase the volume.
If you feel any resistance when rotating the volume dial, STOP and do not
continue to rotate.
When rst using the Audien Atom, keep the volume level at the rst
tick mark. Slowly increase the volume until you nd which volume
level is most comfortable for your ears.
Be sure not to turn the volume too high, as this can cause discomfort in your ears.
4
To Next Page
Loading...