Audien Atom - Page 5

3
SETTING UP YOUR DEVICE
Adjusng The Volume
To adjust the volume on your Audien Atom you will
need the Volume Adjusng Tool/Cleaning Brush.
Insert the Volume Adjusng Tool end (the non-
brush side) into the small slit on the volume dial.
Turn the volume dial COUNTERCLOCKWISE to
decrease the volume, and CLOCKWISE to increase
the volume.
If you feel any resistance when rotang the volume
dial, STOP and do not connue to rotate.
When rst using the Audien Atom, keep the
volume level at the rst ck mark. Slowly
increase the volume unl you nd which
volume level is most comfortable for your ears.
Be sure not to turn the volume too high, as this can
cause discomfort in your ears.
4