Audient Nero - User Manual

Need help?

Do you have a question about the Audient Nero and is the answer not in the manual?

Summary

Alt Input

Alt Input Button

Selects the currently active input. AUX input uses RCAs or 3.5mm Jack. Indicators flash if no valid input is detected.

Aux Input Volume Knob

Provides a trim control to quickly adjust the analogue AUX input level to match other line inputs.

Talkback

Talkback Button

Communicate with artists listening on headphones.

Talkback Gain and Rear Panel Switch

Adjust talkback gain and select internal/external mic with phantom power.

Control Room

Control Room Monitoring Features

Features include Dim, Cut, Mono, Polarity Flip, and Subwoofer control for speaker management.

Control Room Setup Mode

Enter setup mode to set permanent Mono, link sub output, or adjust speaker trims. Save settings by pressing the button again.

Headphone Outputs

Headphone Volume and Source Selection

Control volume for independent headphone amps and select input sources via SRC buttons.

Saving Headphone Settings

Save routing options by pressing any two speaker output buttons simultaneously.

Rear Panel Connections

SPDIF and Sub Output

Connect digital audio sources via SPDIF inputs and manage subwoofer output.

Power, Headphone, and Speaker Outputs

Connect power, headphones (HP2-4), and speaker outputs (ALT 1/2, MAIN).

Analogue Input and Talkback Mic Selector

Connect analogue sources and select talkback microphone input.