WIFI FAQ
MY SPEAKER WILL NOT CONNECT
TO MY NETWORK
• Make sure your mobile device is connected to your
wireless network before you try to connect your
speaker.
• Place the speaker close to the router when carrying
out the setup. You can subsequently view the signal
strength for other positions in the app.
• Our speakers can only connect to a 2.4 GHz wireless
network.
I GET THE MESSAGE
“DEVICE CONNECTION FAILED”
• Move the speaker closer to the router.
• Make sure your mobile device is connected to the
same network.
• Press the “Wi-Fi Connect” button on the rear of the
speaker and press the “Add Speaker” icon in the app.
MUSIC CUTS OUT/STUTTERS
OR EXPERIENCES DELAYS
• Make sure your internet connection is working
correctly.
• Check for other devices in the network, they might
be using a lot of bandwidth. Especially downloads or
the streaming of high resolution video.
• Check the signal strength in the Audio Pro app; if the
signal strength is low, move closer to the router.
More FAQs and help can be found
on audiopro.com/support/
!
EN: SPECIFICATIONS
Type: Wireless multiroom speaker
Amplifier: Digital Class D, 52W
Tweeter: 2 x 1.25” BMR driver
Woofer: 1 x 3”, long throw
Passive radiator: Dual 2 x 4.5”
Frequency range: 55 – 20.000Hz
Crossover frequency: 300Hz
Dimensions HxWxD: 193 x 140 x 140 mm
Wall bracket insert nut: M6 Inputs:
Wifi, Bluetooth V4.0 and Aux In 3.5mm stereo
Wireless network compatibility:
02.11 b/g/n, 2.4GHz only
Supported audio formats:
MP3, WMA, AAC, FLAC, Apple Lossless
Power consumption WiFI/STBY/ON:
1.8W-0.3W-3W
To Next Page
Loading...
Need help?
General
Weight and Dimensions
