To Next PageTo Next Page
Need help?Do you have a question about the Audio Pro Evidence E.6 and is the answer not in the manual?
Audio Specifications| amplifier power | 75 Watts |
|---|---|
| frequency range | 28 - 35, 000 Hz |
| impedance | 8 ohm |
Driver Units| tweeter size | 1 inch |
|---|---|
| midwoofer size | 6 1/2 inch |
| subwoofer size | 6 1/2 inch |
Crossover and Filters| lowpass filter | 70Hz, 24dB/octave |
|---|---|
| highpass filter | 70Hz, 1:st order electronic filter and 4:th order acoustic filter |
| crossover frequency | 3, 200Hz, 6/18dB |
Weight and Dimensions| weight | 19.8 kg each |
|---|---|
| width | 190 mm |
| height | 960 mm |
| depth | 320 mm |
Provides numbered safety and operating instructions, including read and retain instructions, heed warnings, follow instructions, and cleaning precautions.
Adjusts the subwoofer level for 5.1 connections; only active when Line-In is used.
Adjusts the overall sound level of the subwoofer; use with care due to program material energy.
Powers the subwoofer amplifier ON or OFF; ensure it is OFF during installation.
Fuse type T1AL 250V for 115V operation; replace only with the same type and rating.
Connects to the subwoofer out from a 5.1 amplifier.
Connects to the speaker output from an amplifier.
The power cord for connecting the unit to a 115V power source.
Instructions for carefully unpacking the speaker, checking for damage, and retaining packaging.
Connects speakerwire to HI LEVEL IN and advises on mains cord connection after all other connections are made.
Connects RCA cord from SUB-OUT to LINE-IN and uses Y-adaptor for left/right subwoofer connection.
Details on switching the subwoofer amplifier ON/OFF and the importance of turning it OFF when not in use.
Automatic standby mode activation after 20 minutes of no signal, and auto-start upon signal detection.
Blue light indicates the amplifier is ON; no light indicates standby mode or amplifier shut-off.
Guidance on positioning the speaker for optimal bass amplification and creating an equilateral triangle for listening.
Steps to check connections and cables, and notes on overload protection for the subwoofer amplifier.
Details amplifier, drive units, frequency range, impedance, filters, crossover, dimensions, and weight.
