Need help?Do you have a question about the Audio Research VT200 and is the answer not in the manual?
Details features and specification changes for the MKII version of the VT200 amplifier.
Lists critical warnings regarding electrical hazards, moisture, and proper operating conditions.
Instructions for unpacking and installing vacuum tubes before operating the amplifier.
Step-by-step guide for carefully removing and installing vacuum tubes into their sockets.
Specifies requirements for connecting the amplifier to a suitable AC power source for optimal performance.
Provides instructions and parameters for adjusting the output tube bias for optimal performance.
Lists comprehensive technical data including power output, frequency response, and dimensions.
General| Type | Vacuum Tube Amplifier |
|---|---|
| Power Output | 200 watts per channel |
| Tubes | 8 x 6550 |
| Input Impedance | 100 kOhms |
| Output Impedance | 4, 8, 16 ohms |
| Frequency Response | 20 Hz to 20 kHz |
| Dimensions | 19 x 8.75 x 17.5 inches (W x H x D) |
| Total Harmonic Distortion | <1% at full power |
| Inputs | Balanced XLR |
To Next Page